10. Care & Maintenance
1) Clean the surface of the machine with a damp cloth.
2) Remove water collection tray, clean and replace.
Attention: When Cleaning
1) Clean the machine at least once per week.
2) When cleaning remove the power cable from the
outlet.
3) Do not use hot water, any strong chemicals or solvents
to clean the machine. Use a damp cloth with a mild
soapy solution only.
4) Remove air filter cover, clean cover and internal mesh
screen with a damp cloth and wipe dry before replacing.
5) Do not hose or wash down the machine, it may result in
short circuit damage and corrosion within the machine.
6) After cleaning check the power cord and connector is
free from damage and moisture.
7) If the machine has been left standing and unplugged
from power for a long period of time. First drain the
water tank and dry off the machine before turning the
power on again.
Do not wash main air filter or wipe with damp cloth
To Next Page
Loading...