7
© 2017 Focal Point Fires plc.
7.0 REVERSING THE DOORS - CONTINUED
GB IE
7. Remove the middle door hinge and refit on the opposite side.
8. Correctly position the bottom door and then secure the middle hinge. Note: Always put the bottom door on first.
10. Refit the top-hinge with a phillips screwdriver or a spanner on the opposite side from it’s original position.
9. Use a spanner to remove the pin from the top hinge pin fixing bracket. Then turn the hinge pin bracket over and refit the
hinge pin with a spanner.
To Next Page
Loading...