Focal Bathys - Jack Cable Connection; USB DAC Connection

18
Bathys
EN
User manual
b. Jack
To use the headphones with the jack mode, you must use the jack cable supplied in the pack. Connect the
cable to the jack input on the right-hand earcup of the headphones. The power switch must be in the ON
position. When you connect the jack cable, the Bluetooth® function will disconnect.
If the cable is damaged, contact your dealer who will supply you with the spare parts you need.
c. USB DAC
To use the USB DAC mode, use the USB-C® cable supplied with the product and move the power switch
to the DAC position.
If the cable is damaged, contact your dealer who will supply you with the spare parts you need.