20
Bathys
EN
User manual
7. Active noise reduction - Transparency mode
To change the noise reduction mode or enable the transparency mode, press the button located on the
left-hand earcup of the headphones. Choose between noise reduction and transparency mode with a
short press. Change the noise reduction mode by pressing and holding for 2 seconds.
These modes can be changed using the app.
There are 2 noise reduction modes and one transparency mode.
- Silent: provides the highest level of noise reduction.
- Soft: reduces the lowest-frequency noises while allowing you to hear ambient noise.
- Transparency: allows you to hear ambient noise and have a conversation without removing the
headphones, while continuing to listen to your music.
If the headphones are used without music in the DAC position, the active noise reduction feature reduces
background noise. The noise reduction will work as long as there is battery. If the ON position is used, the
headphones will automatically enter standby after 15 minutes, which will switch off active noise reduction.
You should follow the same precautions relating to active noise reduction as when using the feature with
music.
8. Voice assistants
The headphones are compatible with the Google Assistant and Amazon Alexa voice assistants, as well as
the voice assistants on your devices. In the app, choose which voice assistant you want to use and connect
to the Google Assistant or Amazon Alexa account. To activate this feature, press the button on the right-
hand earcup of the headphones, and speak.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
