EASY
A
User
manual
•
Precautions
for
use
The TNV2
tweeter
uses a relatively flexible
Aluminium/Magnesium
alloy,
with
a
"shape
memory"
enabling it to
withstand the
majority
of
small
impacts
in
the home. Nevertheless, we recommend leaving the fabric
grilles
in
place
to protect the dome.
If
the dome surface is marked this could have an
impact
on the
tweeter
.
Cleaning
instructions
The only maintenance required
for
Easya is dusting with a dry cloth.
If
the cabinet becomes marked, we recommend
simply using a damp cloth. The glass
top-plate
can
be
cleaned using a soft cloth and a standard glass cleaning
product. Never use solvents, detergents, alcohol-based
or
corrosive products,
scrapers
or
scourers to clean the
loudspeaker surface. Keep the loudspeakers away
from
sources of heat.
Decoupling spikes assembling
Easya loudspeakers are intented to
be
floor
mounted only.
It is
important
to ensure
that
the loudspeakers stand
firmly
on
the
floor
using the spike feet supplied whenever possible.
If
not use the
rubber
feet
or
the protective caps
for
the spikes.
{Fig.
J,
K}
To
screw
the spike feet
or
the
rubber
feet, stand the speaker
on
its top (placed
on
the packing
cap) taking care not to damage the cabinet
or
the drive units during handling. Before screwing the spikes
on
the
cabinet, screw the lock nut onto the spikes. Then screw the spikes fully into the threaded
inserts
of the cabinet.
If
the
cabinet rocks when placed
on
the floor,
unscrew
one
or
two spikes
that
do not touch the
floor
until
the cabinet rests
firmly
without
rocking. Finally lock the nuts against the cabinet.
It
may
be
more convenient to fit and adjust the spike
feet
after
speaker positioning has been optimised.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
