PERFORMANCE EXPERT
PS
165F/130F -
PS
165FX/165F3
User
manual
•
Fitting the crossover
Locate the crossovers in a dry, preferably ventilated area, using either the screws supplied
or
double-sided tape.
To
open the
box,
squeeze the middle
on
the side, and remove the cover.
In
some cases, depending
on
your installation
and the space available, it maybe easier to route the cables and connect
to
the crossover, before securing the
crossover to the vehicle. Please check before.
PS
165FX
-
PS
165F3
PS
165F-
PS
130F
Level adjustment of
tweeter
and midrange
The
toggle switch inside the crossover allows the users to adjust the tweeter level according to their tastes and also
to the speaker location
in
the car,
in
order to get the best sound reproduction possible.Too much level in the treble
frequencies gives
an
aggressive sound and a level lack alters definition and dynamics.
If the tweeter is placed very close to the mid bass driver, set it
on
0.
If the tweeter is placed
on
the dashboard
or
on
top of the door and the woofer in the door, set it
on
-3
ou
OdB.
Tweeter adjustment
0 dB, -3 dB
Woofer adjustment: high/flat
PS
165FX
-
PS
165F3
Tweeter adjustment: 0 dB, -3
dB
PS
130F-
PS
165F
To Next Page
Loading...
Need help?
General
