SIB
User manual
English
Placement
A - On a shelf
Place the loudspeakers equally spaced either side of the listening position.
It is advisable to place Sib at least 80cm from the floor for a better sound
stage.
B - Wall fixing
1. Before drilling any holes, check carefully that there are
no electrical cables or pipes in the wall.
2. Use the hexagonal key supplied in the base of the Sib
to unscrew the bolt that holds the base to the support
bracket
3. Connecting Sib : see section “connections” page 4.
Feed the cable through the base piece as
indicated in the diagram.
Leave around 10cm of free cable to facilitate connection.
4. Use the base as a template to mark the
position of the three fixing screws on the wall. The three
fixing holes should be drilled with a 6mm masonry bit
and the plastic wall plugs firmly inserted until they are
flush with the wall surface.
Fix the base with the three screws supplied.
To Next Page
Loading...
Need help?
General
