Focal ST6 SUB12 User Manual

27
SOLO6 - TWIN6 - SUB12
Professional Analogue Monitoring System - User Manual
EN
All specifications are subject to change.
Performance SUB12
• Frequency response (@ -3dB) 28Hz – 400Hz
• Maximum SPL
(Average CEA2010B 30-200 Hz free field @ 1m)
124.5dB
Electronic section
• Input Balanced XLR LFE 10k, Left & Right 10k
• Outputs Balanced XLR LFE (in parallel), Left & Right 50
• Bass amplifier stage 600W RMS
• Nominal power supply ~100–120 VAC/220–240 VAC
50/60Hz
• Rated power consumption 180W
• User controls Sensitivity, Stand-by, Polarity, Phase, LPF, Volume, HPF
• Fuses ~100-120V, T10AL/250V
~220-240V, T5AH/250V
• Internal signal processing and functions
- Subwoofer section
Left/right mono summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection
Switchable high-pass crossover,
frequency cut-off selection
24dB/octave
• Outputs (to satellites)
- Type/Impedance
- Connector
Right, left
Electronically balanced / 50
3-point male XLR
Transducers
• Bass 1 x 13" (33cm) x ‘W’ cone
• Shielding no
Loudspeaker
• Construction 1
1/8
" (30mm) MDF
• Finish Dark red natural veneering side panels, black body
• Dimensions (HxWxD) 23
5/8
x19
1/8
x22
3/8
" (600x487x568mm)
• Weight 127.8lbs (58kg)
• Temperature range During use: 5-35°C
In storage: 0-50°C

Focal ST6 SUB12 Specifications

General

Brand	Focal
Model	ST6 SUB12
Category	Speakers
Language	English