Quick Start Guide
FS-100 Portable DTE Recorder 9
9 Transfer Files from FS-100 to Computer
1. Connect the FS-100 through
its COMPUTER I/O 1394
port to the computer system
using a standard 6-pin to 6-
pin FireWire cable.
2. Go to the
HDD MODE
menu.
3. Select the
DD DRIVE menu option
and use the Right Arrow to go to the
CONNECT screen.
4. Press the
ENABLE function button.
5. Consult your computer’s
documentation for information about
how to mount an external drive to your system.
Once the FS-100 is mounted as a drive on your system, transfer
the entire Content folder to your system.
FS-100 to Computer
(FireWire Connector)
HDD MODE
DVCPROHD REC
DVCPRO50 REC
D V C P R O /DV R EC
-DD DRIVE
To Next Page
Loading...
Need help?
General
