Quick Start Guide
FS-100 Portable DTE Recorder 7
5 Connect FS-100 to AG-HVX200
6 Configure Camera and Record
1. Power on the camera.
2. Set the
TAPE/P2 switch to P2.
3. Press the
MENU button on the top of the AG-HVX200 camera.
Select the
RECORDING SETUP option.
Set the
REC FORMAT P2 to a 1080 or 720 HD format
(PN modes are not supported).
4. Under the
OTHER FUNCTIONS menu, set the 1394 CONTROL to
BOTH.
5. Press
REC trigger button on the top or side (Step 1) of the camera.
FireWire 6-pin to 4-pin cable
1394
connector
Camera
connector
1
3
2
5
4
4