To Next PageTo Next Page
Need help?Do you have a question about the Focus Izalco Chrono MAX and is the answer not in the manual?
General| Frame Material | Carbon |
|---|---|
| Fork | Carbon |
| Groupset | Shimano Ultegra Di2 |
| Wheel Size | 700C |
| Tires | Continental Grand Prix 5000 |
Guides on applying friction paste, inserting the compressor, and installing bearings.
Steps for inserting the stem, fork, and tightening the compressor cap.
Instructions for final stem tightening and checking steer angle limitation.
Optional installation of the Di2 battery and fixation device into the seat post.
Steps for preparing the clamp cone, applying paste, and installing the seat post.
Adjusting stud screws and checking rear wheel alignment to the frame.
Mounting cantilever sockets and assembling the rear brake arm.
Steps for assembling the front brake arm and adjusting tension springs.
Details on brake parts, rim width, and recommended washer sizes.
Routing the cable tunnel and rear derailleur cable through the frame.
Installing the front derailleur cable hose into the cable tunnel.
Sequence for tightening stem cap screws with specified torque.
A comprehensive list of torque values for various assembly points.
Visual guide for applying stickers and inserting rubber/plastic plugs.
Details screw types and quantities for different TRIA stem spacer setups.
