Need help?Do you have a question about the FOG QUADRA 493 9031 and is the answer not in the manual?
Step-by-step placement of cross-members, columns, and tracks.
Adjusting shims to ensure the platform is level.
Checking and adjusting column verticality and squareness.
Routing and connecting wire ropes to the pulleys.
Filling the pump unit reservoir with the correct oil grade.
Adjusting shims to ensure the platform is level.
Adjusting wire ropes to prevent safety switch activation and ensure latch engagement.
Inserting and adjusting tie rods for column alignment.
Verifying column squareness, centering, and clearance.
Monitoring wire rope tension to activate safety switches.
Testing the valve's function to stop lowering if a hose fails.
Steps to commission the auxiliary lift, including bleeding air and checking platform height.
Safety rules to be displayed and followed during lift operation.
Procedures for raising the platform using the control knob and lever.
Steps to manually lower the platform if electrical power is lost.
Manual lowering of auxiliary platforms without electrical power.
Checking wire rope adjustment and overall platform level.
Checking pulleys, wire ropes, power-pack, safety systems, and connections.
Provides solutions and corrective actions for identified faults.
Procedure for adjusting the flow control valve pressure.
General| Brand | FOG |
|---|---|
| Model | QUADRA 493 9031 |
| Category | Lifting Systems |
| Language | English |
To Next Page