Need help?Do you have a question about the FOG QUADRA 493 9021 and is the answer not in the manual?
General| Brand | FOG |
|---|---|
| Model | QUADRA 493 9021 |
| Category | Lifting Systems |
| Language | English |
Instructions for drilling and anchoring columns using base plates as templates.
Step-by-step guide for fitting and routing the platform suspension wire ropes.
Guides the connection of hydraulic hoses and electrical cables for model 493 9021.
Guides the connection of hydraulic hoses and electrical cables for model 493 9031.
Details electrical supply requirements and connections according to IEE regulations.
Details filling the pump unit reservoir with the correct oil grade and initial checks.
Explains the necessity and procedure for adjusting wire rope tension.
Verifies column squareness, centering, clearance, and verticality.
Checks the clearance between the switch roller and the cam for safety switch function.
Tests the sensor's functionality by simulating an obstruction or rope failure.
Tests the ram safety valve's operation to stop lowering during hose failure.
Essential safety guidelines that must be displayed and followed during lift operation.
Manual procedure to lower the platform if electrical power is interrupted.
Explains the requirement and procedure for dynamic and static overload tests.
Offers solutions and corrective actions for identified faults and issues.
Lists key technical specifications like load capacity, dimensions, and power.
To Next Page