PresentationPRO Command List/Description
Command:
AUDEN op n
Description: Audio Enable Mode for selected audio input
Parameters: op - Audio input; [M|V|C|L|1-7], Main|Video|Mic|Line|Input 1-7
n - Input Mode; [0|1], Mute|Enable
Query:
AUDEN? op
Returns the audio enable mode for the selected audio input in the format:
=n
Example: AUDEN 2 0 (Set Audio Input Source 2 to Mute.)
AUDEN? 3 (Returns audio enable mode for Audio Input Source 3.)
Command:
AVT op n
Description: Adjusts the Audio Video type mode for selected input source
Parameters: op - input source; [1-7]
n - type; [0|1], Professional|Consumer
Query:
AVT? op
Returns the Audio Video type mode for the selected input source in the format:
=n
Example: AVT 6 0 (Sets line type for input 6 audio source to professional
mode.)
AVT? 5 (Returns line type for input 5 audio source.)
Command:
DL op n
Description: Transfers the selected input source’s input configuration parameters to a remote device over the
serial port.
Parameters: op - I
n - input source; [1-7]
Example: DL I 3 (Returns the input configuration parameters of input source 3.)
Command:
ECHO port n
Description: Sets the serial port echo mode.
Parameters: port - serial port; [A]
n - mode; [0|1], Disable|Enable
Example: ECHO A 0 (Disables echo of serial port.)
Query:
ECHO?
Returns the current serial echo state.
=n
Example: ECHO?
Command:
FPLOCK op
Description: Front Panel Lock Out
Parameters: op - front panel lock out mode; [A|D|M], All|Disable|Menus Only
Query:
FPLOCK?
Returns the Front Panel Lock Out status in the format:
=op
Example: FPLOCK A (All Front Panel keys are locked out and the following
message is displayed on the front panel:
FRONT PANEL LOCKED )
FPLOCK M (The Front Panel Menu keys are locked out, but the source
keys are still active. The following message is displayed on the front panel:
FRONT PANEL MENU
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher 32
To Next Page
Loading...