LOCKED.
SOURCE KEYS ACTIVE )
FPLOCK D (The Front Panel is unlocked.)
FPLOCK? (Returns front panel lock out mode.)
Command:
FREEZ n
Description: Enable/Disable Freeze
Parameters: n - Enable/Disable; n[0/1], OFF|ON
Example: FREEZ 1 (Enables freeze on the display.)
Command:
FSB n
Description: Force Scaler Black
Parameters: n - force scaler black mode; [0|1], OFF|ON
Example: FSB 1 (Scaler will show a black screen.)
FSB 0 (Scaler will show the current input source.)
Query:
FSB?
Returns the force scaler black state
=n
Example: FSB?
Command:
HELP
Description: Displays the list of available command on a terminal emulator
Parameters: None
Example: HELP (Returns the command list.)
Command:
IBRT op nnn.n
Description: Adjusts the Input Brightness value of the current source.
Parameters: op - Select Brightness Control; [C|R|G|B], Common|Red|Green|Blue
nnn.n - Brightness value; C Range 75 to 125%, RGB Range -25 to 25%
Query:
IBRT?
Returns the Input Brightness of the Common, Red, Green, and Blue of the current source in the format:
=ccc.c rr.r gg.g bb.b
Example: IBRT C 110 (Adjusts the Input Brightness for the current source to be
110%.)
IBRT? (Returns the Input Brightness for Common, Red, Green,
and Blue.)
Command:
ICGTE n
Description: Adjusts the Input Clamp Gate mode of the current source.
Parameters: n - Clamp Gate Selection; [0|1|2], SYNC|PRCH|PDLY
Query:
ICGTE?
Returns the Input Clamp Gate mode of the current source in the format:
=n
Examples: ICGTE 0 (Adjusts the Input Clamp Gate to be SYNC.)
ICGTE 1 (Adjusts the Input Clamp Gate to be PRCH.)
ICGTE 2 (Adjusts the Input Clamp Gate to be PDLY.)
ICGTE? (Returns the Input Clamp Gate mode.)
Command:
ICNT op nnn.n
Description: Adjusts the Input Contrast values of the current source.
Parameters: op - Select Contrast Control; [C|R|G|B], Common|Red|Green|Blue
nnn.n - Contrast value; C Range 75 - 125%, RGB Range -25 - 25%
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher 33
To Next Page
Loading...