Need help?Do you have a question about the FOM INDUSTRIE BLITZ 60L and is the answer not in the manual?
Defines the machine's specific use for aluminium/light alloy and warns against hazardous environments.
Covers operator responsibilities, lighting, ventilation, and material handling for safe operation.
Details safe practices for operators, including PPE and machine shutdown procedures.
Lists and describes the various safety devices integrated into the BLITZ machine.
Explains designated 'risk and residual risk' areas and perimeter delimitation procedures based on machine placement.
Details residual risks associated with optional chip removal belts and summarizes conclusions on risk area management.
Provides a detailed step-by-step guide for leveling the machine using its adjustable feet.
Explains the function of each button and selector on the control panel for machine operation.
Specifies requirements for efficient, safe, and reliable mains power and compressed air supply.
Details the procedure for connecting the electrical power lead to the machine's electrical cabinet.
Outlines protection measures for power leads against overloads, short circuits, and differential currents.
Guides the connection of the air hose, setting air pressure, and adjusting the pressure switch.
Details enabling the machine, checking blade rotation, and performing zeroing procedures.
Explains how to perform cuts in manual mode, including clamping and blade activation.
Describes how to activate and perform semi-automatic and optional step-by-step cutting cycles.
Covers vice jaw positioning, horizontal vice cylinder adjustment, and vice safety.
Covers setting angles, cutting rules, and choosing the correct saw blades for optimal performance.
Details correct profile positioning on the worktable using suitable vice jaws.
Covers daily tasks like checking lubrication oil and air pressure, and cleaning work surfaces.
Details periodic lubrication of mechanical parts, ball screws, and grease specifications.
Provides a step-by-step guide for safely removing and fitting a new saw blade.
General| Model | BLITZ 60L |
|---|---|
| Category | Saw |
| Manufacturer | FOM INDUSTRIE |
| Blade Diameter | 600 mm |
| Motor Power | 4 kW |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Rotation Speed | 2800 RPM |
To Next Page
