EN
20
the second ring.
the rst ring and the second ring. So please answer the phone after
the second ring.
From the handset
Pick up the handset and talk to the other end
After nished, return the handset to the base.
Note: Generally telecom transmits the incoming message between
the rst ring and the second ring. So please answer the phone after
the second ring.
Making a call
Pick up the handset;
When hearing the dialing tone, dial the desired number. The LCD
will auto-time the conversation after 6 seconds;
After nished, return the handset to the base.
Redialing function
Pick up the handset, press REDIAL key, the last dialed number will
be dialed out again.
REVIEWING, CALLING BACK AND DELETING INCOMING CALL
The phone can record 38 Incoming calls. Over 38 incoming calls,
the earliest one will be replaced, When receiving a FSK or DTMF
phone call, the unit will auto-detect and LCD displays the phone
number together with the calling date & time, and a serial number.
A secret number comes, LCD displays ….p….
For error incoming message, LCD displays .…E….
If incoming call is from an area without Call ID service, LCD
displays …o…
The current date and time will be updated by the FSK Caller
ID signal while the year setting remains unchanged. DTMF
Caller ID signal will not change the date and time setting as
it only contains the caller’s number.
To Next Page
Loading...