Input 3 AAA batteries into the batteries compartment according to
the correct polarity. LCD will display year, month, date and time.
Insert one end of the line cord to the line jack of the base and the
other end to the exchanger.
Connect the handset and the unit with coiled line.
When a call comes, the telephone rings, and LCD displays the seq.
number of the call, the date, time, incoming number and NEW icon.
If the number has come twice or more and has not been checked,
LCD displays REP icon.
The OUT is displayed when reviewing the outgoing number.
When incoming memory is full, the latest incoming number is
always replacing the oldest number.
Note: For the phone to display incoming number and other
information, you must have an active Caller ID subscription with
your local telephone exchange company.
From the handset
Pick up the handset and talk to the other end
After nished, return the handset to the base.
Note: Generally telecom transmits the incoming message between
the rst ring and the second ring. So please answer the phone after
GETTING STARTED
RECEIVING CALLS
2
3
To Next Page
Loading...