FoodSaver GM2150 Series User Manual (English)

Questions and Answers:

J
jtateJul 27, 2025
Why is air re-entering the bag after vacuuming with my FoodSaver Kitchen Appliance?
- J
  jwarrenJul 27, 2025
  Air may re-enter the bag after vacuuming due to several reasons: * A wrinkle along the seal might be the cause. To prevent this, gently stretch the bag flat while inserting it into the vacuum channel. * Moisture or food material along the seal may prevent proper sealing. Cut the bag open, wipe the top inside, and re-seal. * Sharp food items may have punctured the bag. Use a new bag or cover sharp items with a soft cushioning material before re-sealing. * Fermentation or the release of natural gases from the food may have occurred, indicating spoilage. Discard the food if this is the case.
T
Terri BlairAug 2, 2025
Why is my FoodSaver Kitchen Appliance bag melting?
- C
  Christopher CoxAug 2, 2025
  The bag might be melting because the sealing strip has become too hot. Always wait at least 20 seconds for the appliance to cool down before vacuum sealing another item. Also, ensure you are using FoodSaver brand bags, which are designed specifically for FoodSaver units.
K
Kelly GutierrezAug 8, 2025
Why is the red seal LED flashing on my FoodSaver Kitchen Appliance?
- E
  emma20Aug 8, 2025
  The red seal LED might be flashing because the gasket is loose or torn, preventing the bag from sealing properly. Ensure the unit is plugged in and the wall outlet is functional. Also, open the latch, make sure the lid is completely down, and then re-latch the lid.
H
Haley BarnesAug 13, 2025
What to do if nothing happens when I close the latch and press the button on my FoodSaver Kitchen Appliance?
- U
  ugonzalezAug 14, 2025
  If nothing happens when you close the latch and press the button, first ensure that the unit is plugged in and the wall outlet is functional. Then, open the latch, make sure the lid is completely down, and re-latch the lid.
M
Mary RichmondAug 20, 2025
How to insert bag into my FoodSaver Kitchen Appliance?
- M
  Melanie JonesAug 20, 2025
  To properly insert a bag, ensure there is enough bag material to reach the center of the drip tray, allowing about three inches (7.62 mm) of extra space for a tight seal around the food. Gently stretch the bag flat while inserting it, with the curl facing down into the vacuum channel.