To Next PageTo Next PageWhat to do if the vacuum pump is running, but the bag is not evacuating on FoodSaver V3800?
If your FoodSaver Kitchen Appliance's vacuum pump is running but the bag isn't evacuating air, ensure that if you're using a roll to make the bag, one end is completely sealed. Also, inspect both the top and bottom gaskets for any foreign objects, dirt, or debris.
How to fix a flashing red seal LED on FoodSaver V3800?
If the red seal LED is flashing on your FoodSaver Kitchen Appliance, it could be due to a few reasons. First, ensure the bag is correctly inserted. If it is, try removing the bag, waiting for the red light to stop flashing, and then re-inserting it. Also, allow 20 seconds between seals. If the issue persists, the unit might be overheated, so wait several minutes for it to cool down.
Why are there no lights on my FoodSaver V3800 Kitchen Appliances control panel?
If the control panel lights on your FoodSaver Kitchen Appliance aren't turning on, first ensure the unit is properly plugged into a functional wall outlet. If it is, try pressing the on/off button to see if that activates the lights.
What to do if nothing happens when bag is inserted into FoodSaver Kitchen Appliances?
If your FoodSaver Kitchen Appliance isn't starting when you insert a bag, first, check that the unit has power. Next, make sure the drip tray isn't full. Also, confirm that the upper bag detection tray is correctly in place. Avoid overfilling the bag, leaving 3 inches of space between the food and the top. Finally, ensure the bag is inserted correctly with the curl down, stretching it flat while inserting and holding until the vacuum pump starts.
Why is the Moist LED flashing on my FoodSaver V3800?
If the Moist LED is flashing on your FoodSaver Kitchen Appliance, it means the Drip Tray has liquid or may be dirty. You should empty the liquid, clean the Drip Tray and replace it in its housing.
General| Type | Vacuum Sealer |
|---|---|
| Model | V3800 Series |
| Seal Type | Heat Seal |
| Canister Mode | Yes |
| Power | 120W |
| Included Accessories | hose |
| Operation | Automatic |
| Sealing Modes | Dry, Moist, Gentle |
| Roll Storage | Yes |
| Cutter | Built-in |
| Bag Compatibility | FoodSaver bags and rolls |
Essential safety instructions for using the appliance.
Recommendations for optimal vacuum sealing results.
Introduction to the system and customer support info.
Describes buttons, lights, and displays for operation.
Explains the vacuum channel and auto bag sensing mechanism.
Covers accessory hose, bag opener, cord storage, and roll holder.
Explains how to open the appliance and use release buttons.
Details lower/upper gaskets, sealing strip, and drip tray components.
Explains power, marinate, accessory, and speed settings buttons.
Details Seal/Stop and Pause/PulseVac buttons for sealing control.
Describes tray full, progress, and seal indicator lights.
Explains the Cancel button and its function.
Tips for avoiding wrinkles and ensuring proper sealing of bags.
Instructions for accessory hose and PulseVac™™ control feature.
How to use the built-in bag opener for sealed bags.
Step-by-step guide to create custom bags from a roll.
Instructions for vacuum sealing items using FoodSaver bags.
Explains the benefits and risks of vacuum packaging food.
Tips on thawing, reheating, and preparing foods for sealing.
Guide for storing various foods with and without FoodSaver.
Instructions for cleaning the main unit, drip tray, and detection tray.
How to use the special cycle for faster marinating.
Recipe for a classic All-American meatloaf.
Recipe for marinated and grilled chicken.
Recipe for a hearty stew using fresh ingredients.
Recipe for a versatile tomato sauce.
Recipe for marinated salmon fillets.
Addresses common problems like sealing issues and indicator lights.
Outlines the product's warranty coverage and terms.
