Care and Cleaning
To Clean Appliance:
Do not immerse unit. Turn off sealer and unplug cord. Open appliance door (D), while holding the appliance with two
hands, press two Release Buttons (K) with your thumbs, rotate appliance away from you, and allow appliance to rest on
the counter. After cleaning, hold appliance with two hands and rotate upright until the latches lock.
Check Foam Gasket (M) around Drip Tray (O) and Upper Gasket (Q) which surrounds the Upper Bag Detection Tray (P) to
make sure they are free from food materials into gasket channel.
For important product maintenance information and helpful tips, please refer to the FoodSaver
®
Reference Guide includ-
ed in your kit.
Antibacterial Drip Tray & Upper Bag Detection Tray
Empty Drip Tray after each use (See Fig. 7). Wash in warm soapy water or place in top rack of dishwasher. The Food
Sensors in the Drip Tray (O) will not function correctly if liquid is allowed to remain in Drip Tray.
This appliance has a Tray Full indicator 2 . When excess liquid fills the Drip Tray, the unit will turn off and the Tray Full
Indicator light will activate. To resume normal operation, open Appliance Door (D), press two release buttons (K), rotate
appliance away from you, and allow appliance to rest on the counter. Remove the Drip Tray, empty
liquid, clean Drip Tray and replace in housing. When replacing drip tray, set the right end of the drip tray into place, then
firmly snap the left side down (See Fig. 8). Appliance can be used without Drip Tray, however the Adjustable Food Sensor
setting 6 will not function without the Drip Tray.
Clean Upper Bag Detection Tray after each use. The Upper Bag Detection Tray (P) is removable for cleaning, remove by
lifting the tabs on each end. Do not pull on the Upper Bag Detection Flags to remove the Upper Bag Detection Tray. Clean
Upper Bag Detection Tray by washing in warm soapy water or placing in top rack of dishwasher. Upper Bag Detection
Tray MUST be inserted to use the appliance. Without the Upper Bag Detection Tray, your FoodSaver
®
Appliance will not
detect bag when inserted in the Vacuum Channel (E).
©2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions.
All rights reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer
Solutions, 20B Hereford Street, Brampton, Ontario, L6Y 0M1.
Printed in China.
P.N.136199 Rev. B
Features of Your FoodSaver
®
Appliance
Quick Start Guide
& User Manual
for V3800 series appliances
A. Controls and Indicator Lights
To indicate current setting, vacuum
progress and for added control.
B. Vacuum Progress Display
Blue lights signal progression of
vacuuming and sealing process.
All lights extinguish when the full
process is finished.
C. Seal Button
CrushFree
™
Instant Seal feature.
Prevents crushing delicate items.
D. Appliance Door
Opens to access Built-in Roll Holder
and Cutter.
E. Vacuum Channel
Simply insert bag and the FoodSaver
®
appliance does the rest.
F. Retractable Accessory Hose/
Accessory Port
Accessory hose can be used with all
FoodSaver
®
Brand Accessories.
G. Integrated Bag Opener
Quick and convenient, opens sealed
bags with ease.
M. Foam Gasket
N. Extra-wide Sealing Strip with
Non-stick Coating
Provides extra secure, airtight
seal that’s two times wider.
O. Drip Tray
Catches overflow liquids
and contains Food Sensors
to detect liquid.
P. Upper Bag Detection Tray
Q. Upper Gasket
R. Rubber Seal Profile
For important safety information and helpful tips, please refer to
the FoodSaver
®
Reference Guide included in your kit.
Questions? Visit us at www.foodsaver.com to get tips on vacuum sealing and
order FoodSaver
®
brand accessories, bags and rolls, or call 1-877-804-5383 (Canada).
H. Built-in Roll Holder
For storage of FoodSaver
®
Vacuum Sealing Rolls.
I. Roll Cutter
Simplifies making
custom-sized bags.
J. Auto Bag Sensing
Simply insert open end of bag
into the vacuum channel and the
machine will sense and grasp the
bag, vacuum, seal and shut-off
automatically.
K. Release Buttons
To open appliance
for cleaning.
L. Appliance Door
Opens to access Built-in
Roll Holder and Cutter.
V3860
ON/OFF
MARCHE/ARRÊT
MARINATE
MACÉRER
ACCESSORY
ACCESSOIRE
SPEED
VITESSE
NORMAL
NORMALE
GENTLE
DÉLICATE
DRY
SEC
MOIST
HUMIDE
SEAL
SCELLER
TRAY FULL
RAMASSE-GOUTTES PLEIN
FOOD
NOURRITURE
CANCEL
ANNULER
PULSEVAC™
/MC
Power Button
Tray Full
Indicator
Marinate
Mode
Canister
Mode
Speed
Settings
Adjustable
Food Settings
Cancel
Button
PulseVac
™
Button*
PulseVac
™
LED*
Seal Indicator
Seal
Button
Vacuum
Progress
Display
Indicator
LEDs
Features of Your FoodSaver
®
Appliance
Features of Your FoodSaver
®
Appliance
4
10
11
Registering your appliance is quick and easy at www.prodregister.com/foodsaver. If you register on our website,
you will have the opportunity to receive special bag and accessory introductory offers. Refer to the registration card
in the box.
For more usage tips and safety information, please refer to the FoodSaver
®
Reference Guide or visit our website at
www.foodsaver.com.
1
2
3
5 6
9
8
7
1
2
3
4
5
6
7
8
9
10
11
POWER BUTTON:
Press the power button to begin. The Power Indicator,
Speed Indicator and Food Indicator lights will become
illuminated. After Vacuum Sealing, press Power Button to
turn appliance Off. Note: After 12 minutes, the
appliance will turn Off automatically.
TRAY FULL INDICATOR LIGHT:
During the vacuum sealing process, small amounts of liq-
uids, crumbs or food particles can be inadvertently pulled
into the Drip Tray (O). When excess liquid fills the Drip
Tray, the unit will turn off and the Tray Full Indicator 2
will activate. To resume normal operation, remove the Drip
Tray, empty liquid, wash in warm soapy water or place
in top rack of dishwasher. Dry and replace Drip Tray in
trough. (See Care and Cleaning)
MARINATE MODE BUTTON
A ten minute predetermined sequence of vacuum pulse to
rest ratio allowing foods to get optimum flavor
infusion in the least amount of time. See “Marinating with
your FoodSaver
®
” section on page 5.
CANISTER MODE BUTTON
Press to achieve best vacuum for canisters and
accessories. Push Canister Vacuum Button 4 to begin
vacuum process. Motor will run until Vacuum Sealing
Process is complete.
SPEED SETTINGS BUTTON
When vacuum sealing delicate items, press Speed Setting
Button 5 so that the gentle speed indicator light is illu-
minated. For more control you may press Seal Button 9
at any time to stop vacuum and begin automatic sealing
process. Note: Appliance will default to Normal speed
upon pressing the Power On Button or when power has
been interrupted.
ADJUSTABLE FOOD SETTINGS BUTTON
For optimal vacuuming and sealing of moist or juicy foods,
press the Adjustable Food Setting Button 6 until the
Moist Indicator Light is illuminated. Choose the dry food
setting for foods without liquid.
The Moist Food Indicator light will flash when Food
Sealing Sensors automatically detect any moisture or
liquid in the drip tray (O). Note: Appliance will default
to Dry setting upon pressing the Power Button or when
power has been interrupted, unless liquid is detected in
the Drip Tray. (See Care and Cleaning section of this Quick
Start Guide).
CANCEL BUTTON
Immediately halts the current function opening the
Vacuum Channel.
PAUSE OR PulseVac™ CONTROL BUTTON
(*not available on all models)
Use to manually control the vacuum process and avoid
crushing delicate items. See tips section for
further information.
SEAL BUTTON
CrushFree
™
Instant Seal feature-
This button has four uses:
1. Press to immediately stop the vacuum process
and begin sealing the bag. This prevents crushing
delicate items such as bread, cookies and pastries.
2. Press to create a seal when making bags from a
FoodSaver
®
Roll.
3. Press to create a seal on Mylar bags (such as a
potato chip bag) to keep food sealed airtight.
4. Press during PulseVac
™
mode to seal bag.
VACUUM PROGRESS DISPLAY
Displays vacuum levels as the bag/canister is
evacuated.
SEAL INDICATOR LIGHT
Constant Red light indicates sealing process is engaged.
(Flashing light indicates error)
Fig. 7
Remove For Cleaning
Firmly Snap in Place
Fig. 8
2
3