Deployment Reference SheetAppliance Deployment Overview
You can deploy one or more appliances on your network. The diagram below illustrates a basic appliance deployment.
A separate computer with Windows Server 2008 R2 or Windows Server 2012 or 2012 R2 is required for running TRITON
Manager. See the TRITON Appliances Getting Started guide for details.
* P2 is optional and may be connected to a router or switch.
** Connect the N interface to a bidirectional span, monitor, or mirror port on the switch.
Internet
Firewall
Clients
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Router
*
**
Switch
TRITON Manager
Email
Web SQL Server
Policy Server IP: IP Address:
Log Server IP: User Name:
Subscription Key: Password:
Log Server IP:
Authentication Mode:
Network Configuration
Network Agent Interface (N)
Content Gateway / TRITON AP-EMAIL Interfaces (P1 & P2)
P1
P2
Appliance Controller Interface (C)
IP Address: Primary DNS:
Subnet Mask: Secondary DNS:
Default Gateway: Tertiary DNS:
IP Address: Primary DNS:
Subnet Mask:
Secondary DNS:
Default Gateway: Tertiary DNS:
IP Address: Default Gateway:
Subnet Mask: Primary DNS:
IP Address:
Secondary DNS:
Subnet Mask:
Tertiary DNS:
Above settings apply to P1 and P2
Support & Resources
Appliance Information
C Interface IP: Hostname:
admin is the default user name for the Appliance CLI, TRITON Manager, and Content Gateway Manager.
See the TRITON Appliances Getting Started guide for details.
Getting Started Guide
support.forcepoint.com/documentation
Online Support and Contact Information
support.forcepoint.com/
To Previous Page
Loading...
