Contents [ hide
1 Warnings
2 Functions
3 Connections
4 Programming
5 Programming MICRO
SWITCH
6 Car radio settings
7 File Downloads
8 References
9 Related Manuals
Warnings
Installation to be carried out by trained technical personnel
Make sure you have 12V DC, with negative-pole to mass
When replacing fuse, always use fuse with same Ampere-value
Never open the unit, nor try to repair yourself. Always ask your Retailer or authorized technical staff
Make sure that no foreign objects fall into the unit, they would cause malfunctions, short-circuits or exposure to
dangerous laser-rays
When switching-on, make sure that temperate inside passenger-compartment is at a normal level
When placing the cables, keep away from all car security-devices.
To Next Page
Loading...