Speed control (if equipped)
To turn speed control on
• Press ON
To turn speed control off
• Press OFF or
• Turn off the vehicle ignition.
Once speed control is switched off,
the previously programmed set
speed will be erased.
To set a speed
Press SET ACCEL. For speed
control to operate, the speed
control must be ON and the
vehicle speed must be greater than
48 km/h (30 mph).
If you drive up or down a steep
hill, your vehicle speed may vary
momentarily slower or faster than
the set speed. This is normal.
Speed control cannot reduce the
vehicle speed if it increases above
the set speed on a downhill. If
your vehicle speed is faster than
the set speed while driving on a
downhill in Overdrive, you may
want to shift to the next lower
gear to reduce your vehicle speed.
ON
OFF
RES
SET
ACCEL
COAST
ON
OFF
RES
SET
ACCEL
COAST
com_speed_on.01
com_speed_off.01
com_set_speed.01
Controls and features
28
To Next Page
Loading...
