Ford 1997 E150 - Page 29

If your vehicle slows downs more
than 16 km/h (10 mph) below your
set speed on an uphill, your speed
control will disengage. This is
normal. Pressing RES will
re-engage it.
Do not use the speed
control in heavy traffic or
on roads that are winding,
slippery, or unpaved.
To set a higher speed
• Press and hold SET ACCEL.
Release the switch when the
desired vehicle speed is
reached, or
• Press and release SET ACCEL.
Each press will increase the set
speed by 1.6 km/h (1 mph) or
• Accelerate with your accelerator
pedal, then press SET ACCEL.
You may accelerate with the
accelerator pedal at any time
during speed control usage.
Releasing the accelerator pedal will
return your vehicle speed to the
previously programmed set speed.
To set a lower set speed
• Press and hold COAST. Release
the switch when the desired
vehicle speed is reached, or
• Press and release COAST. Each
press will decrease the set
speed by 1.6 km/h (1 mph) or
• Depress the brake pedal. When
the desired vehicle speed is
reached press SET ACCEL.
ON
OFF
RES
SET
ACCEL
COAST
ON
OFF
RES
SET
ACCEL
COAST
com_speed_up.01
com_slow_down.01
com_disengage_speed_control.01
Controls and features
29