Ford 2005 Explorer - Page 56

4. Remove the bulb socket.
5. Carefully pull bulb straight out of
socket and push in the new bulb.
Reverse steps to reinstall the bulb(s).
Replacing tail lamp/turn/backup lamp bulbs
1. Make sure the headlamp switch is
in the OFF position and lower the
tailgate to expose the lamp
assembly.
2. Remove the three rubber plugs,
screws and the lamp assembly from
vehicle.
3. Rotate bulb socket
counterclockwise and remove from
lamp assembly.
4. Carefully pull the bulb straight
out of the socket.
Reverse steps to reinstall the bulb(s).
2005 Explorer Sport Trac (p27)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
56