Fog lamp control (if equipped)
The fog lamps can be turned on
when the headlamp control is in
the
, ,or positions
and the high beams are not turned
on.
• Press the fog lamp control,
located on the instrument panel,
to activate the fog lamps.
• Press the fog lamp control again
to deactivate the fog lamps.
Note: The fog lamp indicator will illuminate when the fog lamps are
activated.
High beams
• Push the lever toward the
instrument panel to activate.
• Push the lever toward the
instrument panel again or pull the
lever towards you to deactivate.
Flash-to-pass
Pull toward you slightly to activate
and release to deactivate.
Daytime running lamps (DRL) (if equipped)
Turns the headlamps on with a reduced output.
To activate:
• the ignition must be in the on position and
• the headlamp control is in the off or parking lamp position.
Lights
123
2012 Focus (foc)
Owners Guide, 1st Printing
USA (fus)
To Next Page
Loading...
