0 (Off): The ignition is off.
I (Accessory): Allows the electrical accessories, such as the radio, to
operate.
II (On): All electrical circuits are operational. Warning lamps and
indicators illuminate. This is the key position when driving.
III (Start): Cranks the engine. Release the key as soon as the engine starts.
KEYLESS STARTING (IF EQUIPPED)
WARNING: The keyless starting system may not function if the
key is close to metal objects or electronic devices such as mobile
phones.
Note: A valid key must be located inside the vehicle to switch the
ignition on and start the engine.
Note: When locking your vehicle, any remote controls left inside the
vehicle may become disabled. A message may appear in the information
display indicating that there is no key detected if you try to start the
engine. Press the unlock button on the remote control to enable it, then
start the engine.
To switch the ignition on, press the start button once.
It is located on the instrument panel near the steering
wheel. All electrical circuits and accessories are
operational, and warning lamps and indicators
illuminate.
Carry out the following steps to start your vehicle.
1. Move the transmission selector lever to position P.
2. Fully press the brake pedal.
3. Press the start button.
START
STOP
ENGINE
Starting and Stopping the Engine 171
2013 C-Max Full Hybrid (34h)
Owners Guide gf, 2nd Printing
USA (fus)
To Next Page
Loading...
Need help?
General
