Ford 2013 Flex User Manual

Battery and
Charging System
Messages
Action / Description
Check Charging
System
Displayed when the charging system needs
servicing. If the warning stays on or continues
to come on, contact your authorized dealer as
soon as possible.
Turn Power Off to
Save Battery
Displayed when the battery management
system determines that:
• the battery is at a low state of charge or,
• the ignition has been in accessory position
or on position with the engine off for
approximately 45 minutes.
Turn the ignition off as soon as possible to
protect the battery. This message will clear
once the vehicle has been started and the
battery state of charge has recovered. Turning
off unnecessary electrical loads will allow
faster battery state-of-charge recovery.
Transport Mode
Contact Dealer
Contact your authorized dealer as soon as
possible.
Factory Mode Contact
Dealer
Contact your authorized dealer as soon as
possible.
BLIS® Messages Action / Description
Blind Spot Not
Available Sensor
Blocked
Displayed when the blind spot information
system/cross traffic alert system sensors are
blocked. Driver can typically clean the sensor
to resolve.
Blind Spot System
Fault
Displayed when a fault with the blind spot
information system has occurred. Contact your
authorized dealer as soon as possible.
Cross Traffic Not
Available Sensor
Blocked
Displayed when the blind spot information
system/cross traffic alert system sensors are
blocked. Driver can typically clean the sensor
to resolve.
126 Information Displays
2013 Flex (471)
Owners Guide gf, 4th Printing, December 2012
USA (fus)

Ford 2013 Flex Specifications

General

Brand	Ford
Model	2013 Flex
Category	Automobile
Language	English