Pairing Subsequent Phones
Note: Make sure to switch on the ignition
and the radio. Put the transmission in
position P (automatic transmission) or
neutral with the parking brake applied
(manual transmission).
Note: To scroll through the menus, press
the up and down arrows on your audio
system.
1. Press the phone button, and then scroll
to System Settings. Press OK.
2. Scroll to Bluetooth Devices. Press OK.
3. Scroll to Add Bluetooth Device. Press
OK.
4. When Find SYNC appears in the
display, press OK.
5. Put your phone into Bluetooth
discovery mode. See your phone's
manual if necessary.
6. When prompted on your phone's
display, enter the six-digit PIN provided
by SYNC in the radio display. The
display indicates when the pairing is
successful.
The system then prompts with questions,
such as if you would like to set the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up) or download
your phone book.
Phone Voice Commands
"PHONE"
"Call <name>"
1,2
"Call <name> at home"
1,2
"Call <name> at work"
1,2
"Call <name> in office"
1,2
"PHONE"
"Call <name> on mobile OR cell"
1,2
"Call <name> on other"
1,2
"Call history incoming"
2
"Call history missed"
2
"Call history outgoing"
2
"Connections"
"Dial"
1,3
"Go to privacy"
"Hold"
"Join"
"Menu"
2,4
"Phone book <name>"
2
"Phone book <name> at home"
2
"Phone book <name> at office"
2
"Phone book <name> at work"
2
"Phone book <name> on mobile OR
cell"
2
"Phone book <name> on other"
2
1
This command does not require you to
say "Phone" first.
2
This command is not available until
phone information is completely
downloaded using Bluetooth.
3
See Dial table below.
4
See Menu table below.
264
Tourneo Connect/Transit Connect (CHC) Canada/United States of America, enUSA, Edition date: 07/2013
SYNC™ (If Equipped)
To Next Page
Loading...
Need help?
General
