2. Remove the negative battery cable.
3. Remove the positive battery cable.
4. Remove the two nuts from the clamp.
5. Remove the battery.
6. Install in the reverse order.
CHANGING A BULB
WARNINGS
Switch the lights and the ignition off.
Let the bulb cool down before
removing it.
Do not touch the glass of the new
bulb.
Note: Only fit bulbs of the correct
specification.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Note: Disconnect the bulb electrical
connectors and remove the covers to gain
access to the bulbs.
Direction indicatorA
Headlamp main beamB
Direction Indicator
1. Open the hood.
2. Turn the bulb holder anti-clockwise
and remove it.
3. Gently press the bulb into the bulb
holder, turn it anti-clockwise and
remove it.
136
Ecosport (CBW)
Maintenance
To Next Page
General
