EasyManua.ls Logo

Ford ESCAPE 2005 - Engine Data

Ford ESCAPE 2005
622 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Ford Part
Name or
equivalent
Ford Part
Number
Ford
Specification
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
ZC-32–A WSB-M8B16–A2
1
DO NOT USE Motorcraft Specialty Orange Engine Coolant VC-2. Refer
to Adding engine coolant, in the this chapter.
2
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCON V. Refer to your scheduled maintenance
information to determine the correct service interval.
3
The Power Take-off (PTO) is lubricated for life with synthetic lube.
Lubricant levels are not to be checked or changed unless a leak is
suspected or repair required. Replace Power Take-off (PTO) lubricant
with specified synthetic lubricant anytime the unit is submerged in
water.
4
4X4 vehicles exposed for prolonged periods to temperatures less than
–40° F (-40° C) should change out the rear axle fluid to Motorcraft SAE
75W-140 Synthetic Rear Axle Lubricant, Ford part number
XY-75W140–QL meeting Ford specification WSL-M2C192–A.
ENGINE DATA
Engine 2.3L I4 engine 3.0L DOHC V6
Duratec engine
Cubic inches 140 183
Required fuel 87 octane 87 octane
Firing order 1-3-4-2 1-4-2-5-3-6
Ignition system Coil on plug Coil on plug
Spark plug gap 0.049–0.053 inch
(1.25–1.35mm)
0.052–0.056 inch
(1.32–1.42mm)
Compression ratio 9.7:1 10.0:1
2005 Escape (204)
Owners Guide (post-2002-fmt)
USA_English (fus)
Maintenance and Specifications
281

Table of Contents

Other manuals for Ford ESCAPE 2005

Related product manuals