Tachometer: Indicates the engine
speed in revolutions per minute.
Driving with your tachometer
pointer continuously at the top of
the scale may damage the engine.
Odometer: Registers the total miles
(kilometers) of the vehicle.
If equipped with a message center,
refer to Message center in the
Driver Controls chapter on how to
switch the display from Metric to English.
Trip odometer: Registers the miles (kilometers) of individual journeys.
• Standard instrument cluster:
Press the SELECT/RESET control
once to switch from the odometer to
the TRIP A feature. Press the
control again to select the TRIP B
feature. To reset the trip, press and
hold the control again until the trip reading resets.
• Optional instrument cluster:
Press and release the message
center INFO button until “TRIP A”
appears in the display (this
represents the trip mode). Press the
control again to select Trip B. Press
and hold the RESET button for two seconds to reset.
Instrument Cluster
19
2009 Escape (204)
Owners Guide (own2002), 3rd Printing
USA (fus)
To Next Page
Loading...
