When active, this system functions with or
without the use of direction indicators and
hazard flashers.
You must keep your hands on the steering
wheel at all times.
BLIND SPOT ASSIST LIMITATIONS
All system limitations present in the basic
lane keeping system also apply to blind
spot assist.
Blind spot assist does not function under
the following conditions:
• The system does not detect lane
markings.
• One or both rear radar sensors become
blocked or faulty.
• You attach a trailer with a wiring
connection to your vehicle.
Note: Bike, cargo racks and attaching a
trailer could cause false alerts due to
obstruction of the sensor. We recommend
switching the feature off when using a bike,
cargo rack or when not using our trailer
wiring.
Blind spot assist may have difficulty
detecting hazards under the following
conditions:
• If a vehicle is approaching in an
adjacent lane at a relative speed much
higher than your vehicle.
• Bad weather conditions are present
that obstruct the sensors.
BLIND SPOT ASSIST INDICATORS
To Next Page
Loading...
