1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your non Ford-approved remote start
fob.
3. Follow Steps 1-4 in the Clear MyKey威 section.
Troubleshooting
Condition Potential Causes
Can’t create a MyKey威 • Key in the ignition is already a
MyKey威.
• Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key).
• Intelligent access key (if equipped)
is not in the backup slot (for vehicles
with push button start).
• SecuriLock威 passive anti-theft
system is disabled or in unlimited
mode.
• Vehicle has been started using a
non Ford-approved remote start
system that is programmed as
MyKey威. Refer to Using MyKey威 with
remote start systems section.
Cannot program the MyKey威
optional settings
• Key in the ignition is a MyKey威.
• No MyKeys威 are programmed to the
vehicle. Refer to Create a MyKey威
section.
• Vehicle has been started using a
non Ford-approved remote start
system that is programmed as
MyKey威. Refer to Using MyKey威 with
remote start systems section.
Locks and Security
135
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)
To Next Page
Loading...
