EasyManua.ls Logo

Ford Explorer 2011 - Engine Data; Engine Drivebelt Routing; Identifying Your Vehicle; Safety Compliance Certification Label

Ford Explorer 2011
448 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGINE DATA
Engine 3.5L V6 engine
Cubic inches 213
Required fuel Minimum 87 octane
Firing order 1-4-2-5-3-6
Ignition system EDIS
Spark plug gap 0.049–0.053 inch
(1.25–1.35mm)
Compression ratio 10.8 :1
Engine drivebelt routing
IDENTIFYING YOUR VEHICLE
Safety Compliance Certification Label
The National Highway Traffic Safety
Administration Regulations require
that a Safety Compliance
Certification Label be affixed to a
vehicle and prescribe where the
Safety Compliance Certification
Label may be located. The Safety
Compliance Certification Label is
located on the structure (B-Pillar)
by the trailing edge of the driver’s
door or the edge of the driver’s
door.
Maintenance and Specifications
413
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)

Table of Contents

Related product manuals