Engine
Printable View (831 KB)
Installation
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
2. Raise the engine high enough to clear the No. 1 crossmember, then position the engine into the vehicle.
Vehicles with automatic transmission
3. Align the torque converter studs with the holes in the engine flywheel, then lower the engine onto the engine mount towers.
Vehicles with manual transmission
4. Lower the engine onto the engine mount towers.
All vehicles
5. Remove the Heavy Duty Floor Crane and the Diesel Engine Lifting Bracket.
Vehicles with automatic transmission
SECTION 303-01C: Engine — 6.0L Diesel 2005 F-Super Duty 250-550 Workshop Manual
INSTALLATION
Procedure revision date: 04/07/2005
Special Tool(s)
Diesel Engine Lifting Bracket
(D83T-6000-B) 303-D043
Adapter for 303-D043
303-D043-02
Adapter for 303-D043
303-D043-01
Heavy Duty Floor Crane
014-00071
Wrench, Fan Clutch Nut
303-591
Material
Item Specification
SAE 15W-40 Super Duty Motor Oil
XO-15W40-QSD or equivalent
WSS-M2C171-D
Motorcraft Premium Gold Engine Coolant
VC-7-A (in California, Oregon and New Mexico VC-7-B, in Canada CVC-
7-A)
WSS-M97B51-
A1
R-134a Refrigerant
YN-19
WSH-M17B19-A
High Temperature Nickel Anti-Seize Lubricant
XL-2
ESE-M12A4-A
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS5O/~MUS~LEN/20/S5