Note: Ford recommends using DOT 4 Low
Viscosity (LV) High Performance Brake Fluid
or equivalent meeting WSS-M6C65-A2. Use
of any fluid other than the recommended
fluid may cause degraded brake
performance and not meet the Ford
performance standards. Keep brake fluid
clean and dry. Contamination with dirt,
water, petroleum products or other
materials may result in brake system
damage and possible failure.
Note: Automatic transmissions that require
MERCON LV transmission fluid should only
use MERCON LV transmission fluid. The
use of any other fluid may cause
transmission damage.
CAPACITIES AND SPECIFICATIONS - 6.7L DIESEL
Capacities
CapacityItem
15.0 qt (14.2 L)Engine oil (includes filter change)
35.1 qt (33.2 L)
1
Engine coolant (primary high-temperature
cooling system loop)
47.3 fl oz (1.4 L)
2
Engine coolant additive (primary high-
temperature cooling system loop)
15.1 qt (14.3 L)
1
Engine coolant (secondary cooling system)
16.0 fl oz (473 ml)
2
Engine coolant additive (secondary cooling
system)
8 gal (30.2 L)Diesel Exhaust Fluid (DEF)
61 gal (230.9 L)Fuel tank (Dual)(Left side)
(Usable capacity)
3
65 gal (246 L)
(Liquid capacity)
47 gal (177.9 L)Fuel tank (Dual)(Right side)
(Usable capacity)
3
50 gal (189.2 L)
(Liquid capacity)
47 gal (177.9 L)Fuel tank (Small)
(Usable capacity)
3
50 gal (189.2 L)
261
F650750 (TBC), enUSA, First Printing
Capacities and Specifications
To Next Page
Loading...
