Ford F650 - Tire;Wheel Rim Selection and Inflation Pressures; Wheel Nut Torque

WHEEL NUT TORQUE
Size Nut mounting
Torque
Ft. lb. N•m
22 mm Flange 450–500 610–678
Note: Do not use lubrication on dry threads. Where excessive corrosion
exists, a light coat of lubricant on the first three threads of the stud bolt
is permitted. Keep lubricant away from:
• Hex nut and rim clamp contact surfaces.
• Cap nut ball face and ball seat on the disc wheel.
• Flange nut washer surface and flat on the disc wheel.
TIRE/WHEEL RIM SELECTION AND INFLATION PRESSURES
Tire size
Load
range
Approved
rim widths
Axle capacity
Front - lb.
(kg)/psi
(kPa)
Rear - lb.
(kg)/psi
(kPa)
225/70R19.5 F 6.00, 6.75
7280 (3302) /
95 (655)
13660 (6196) /
95 (655)
245/70R19.5 F 6.75, 7.50
8160 (3701) /
85 (586)
15440 (7003) /
85 (586)
245/70R19.5 G 6.75, 7.50
9090 (4123) /
100 (690)
17640 (8001) /
100 (690)
265/70R19.5 G
6.75
10000 (4536) /
115 (793)
19440 (8817) /
115 (793)
7.50, 8.25
10710 (4858) /
120 (827)
20280 (9199) /
120 (827)
9R22.5 F 6.75, 7.50
9080 (4118) /
105 (724)
17200 (7801) /
105 (724)
10R22.5 F
6.75
10000 (4536) /
100 (690)
19760 (8963) /
100 (690)
7.50
10410 (4722) /
100 (690)
19760 (8963) /
100 (690)
2006 F-650/750 (f67)
Supplement
USA (fus)
Maintenance and Specifications
214