EasyManua.ls Logo

Ford Flex 2018 - Post-Crash Alert System; Transporting the Vehicle

Ford Flex 2018
508 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
1
3
2
E142665
1. Remove the negative (-) jumper cable
from the disabled vehicle.
2. Remove the jumper cable on the
negative (-) terminal of the booster
vehicle battery.
3. Remove the jumper cable from the
positive (+) terminal of the booster
vehicle battery.
4. Remove the jumper cable from the
positive (+) terminal of the disabled
vehicle battery.
5. Allow the engine to idle for at least one
minute.
POST-CRASH ALERT SYSTEM
The system flashes the direction indicators
and sounds the horn (intermittently) in the
event of a serious impact that deploys an
airbag (front, side, side curtain or Safety
Canopy) or the seatbelt pretensioners.
The horn and indicators turn off when:
You press the hazard control button.
You press the panic button on the
remote entry transmitter (if equipped).
Your vehicle runs out of power.
Sounding of the horn is only enabled
in specific markets.
TRANSPORTING THE VEHICLE
E143886
225
Flex (TP3) , enUSA, Edition date: 201801, Second Printing
Roadside Emergencies

Table of Contents

Related product manuals