PRINCIPLE OF
OPERATION
Cruise control allows you to control
your speed using the switches on the
steering wheel. You can use cruise
control when you exceed 30 km/h
(20 mph).
USING CRUISE CONTROL
WARNING
Do not use cruise control in
heavy traffic, on twisty roads or
when the road surface is slippery.
Switching cruise control on
Press the SET+ switch or the SET-
switch to store and maintain your
current speed. The cruise control
indicator illuminates.
Changing the set speed
WARNING
When you are going downhill,
your speed may increase above
the set speed. The system will not
apply the brakes. Change down a
gear and press the RES switch to
assist the system in maintaining the
set speed.
Note:
If you accelerate by pressing
the accelerator pedal, the set speed
will not change. When you release
the accelerator pedal, you will return
to the speed that you previously set.
Press the SET+ switch or the SET-
switch to accelerate or decelerate.
161
Cruise control
To Next Page
Loading...
Need help?
General
