Ford MyKey - MyKey with Aftermarket Remote Start

1/29/2020 Anti-Theft - Passive Anti-Theft System (PATS) - MyKey® Programming - General Procedures • 2012 Ford F-150 • MotoLogic
https://www.motologic.com/car/2012_fd_f-150_4716/article/726d26f798630fd01e8ba900fd66fe86?returnPath=%2Fcar%2F2012_fd_f-150_4716%2Fs
…
4/4
4. Use the up and down arrow buttons to scroll to and select Clear MyKeys. Press the OK button.
Using MyKey® with Aftermarket Remote Start System
Program Remote Start System as a MyKey®
1. Enter the vehicle and close all doors.
2. Remote start the vehicle using a remote start fob.
3. Follow Steps 1-6 of the Program a MyKey® procedure in this section.
Clear MyKey® with the Remote Start System
NOTE: It is possible to program all of the keys as MyKeys™, with the remote start system being the only admin key. This
procedure clears MyKey® in the event of the aftermarket remote start system being programmed as the only admin key.
1. Enter the vehicle and close all doors.
2. Remote start the vehicle using the remote start fob.
3. Follow Steps 1-4 of the Clear MyKey® procedure in this section.
Copyright © 2013 Ford Motor Company