Need help?Do you have a question about the Ford Perimeter Plus and is the answer not in the manual?
Details the various methods to arm the vehicle's security system.
Explains the procedures for disarming the vehicle's security system.
Describes system status, monitoring, and alarm cycle when armed.
Explains the function and visual indications of the optional security LED.
Details the operation and sensitivity of the optional shock sensor.
Describes the optional starter interrupt feature for security.
Provides steps to temporarily disable the shock sensor.
Explains how to identify and clear intrusion attempt alerts.
Outlines the process to disarm the system without a keyfob.
Details how to start the vehicle using the basic remote start feature.
Explains how to stop the vehicle using the basic remote start feature.
Describes the procedure to start the vehicle using a 1-way remote transmitter.
Details how to start the vehicle using a 2-way remote transmitter.
Explains how to shut down the vehicle using either transmitter.
Lists the feedback signals and their meanings for the 2-way transmitter.
Explains how to use the Car Find and Panic features with the 2-way transmitter.
Details the steps to enter the vehicle when it is running via remote start.
Explains automatic climate control activation during remote start.
Covers safety precautions and automatic shutdown conditions.
Describes power window/moonroof behavior during remote start.
Explains the automatic door locking function during remote start.
Provides instructions for replacing the remote transmitter battery.
Details the process for programming additional remote controls.
Explains how to remove lost or stolen transmitters from the system.
Describes how to change the remote start activation method.
Explains how to extend the vehicle's remote start run time.
Lists common reasons for remote start failure or no-start conditions.
Outlines the basic warranty coverage period and terms for the system.
Lists the requirements for the customer to obtain warranty service.
Details what is not covered by the limited warranty.
States compliance with FCC and Industry Canada regulations.
To Next Page
General