To Next PageTo Next Page
Need help?Do you have a question about the FOREDOM K.1040 and is the answer not in the manual?
General| Motor | Permanent Magnet DC |
|---|---|
| Speed | Variable |
| Power | 1/6 HP |
| Frequency | 50/60 Hz |
| Voltage | 115V |
Key safety guidelines for operating the micromotor handpiece safely.
Critical warning about operating the handpiece with an open or unlocked collet.
Steps for connecting the power cord and the foot control to the control box.
Procedure for connecting the handpiece to the control box.
Setting the speed dial and verifying the collet position before operation.
Selecting modes, controlling direction, and adjusting speed for micromotor operation.
Interpreting the digital display for current speed readings.
Information on using the T-shaped slots for the handpiece holder.
Detailed steps for opening and closing the handpiece collet to insert/remove accessories.
Description of the included wrenches and their uses for collet and nosecone maintenance.
Steps to prepare the handpiece, including locking/unlocking the collet and removing it.
Procedure for installing a new collet, including finger-tightening and final securing.
Guidance on handpiece lubrication, cleaning procedures, and spindle bore maintenance.
Instructions for understanding fuse protection and replacing a blown fuse in the control box.
List of available replacement parts and optional collet adapters with their part numbers.
Explanation of error codes and their potential causes for troubleshooting.
Guidelines for safe electrical grounding using 3-prong plugs and adapters.
Procedure for requesting an RMA number and preparing items for repair service.
Details on the product's two-year warranty, exclusions, and limitations.
Contact information for Foredom Electric Company, including address, phone, and email.
