If sample come with receptacle, but you just need to
know weight of sample. Please use TARE key.
For reducing the tare weight from the scale, there are
two methods, one is press button tare and the other is
keyboard tare.
1. Press button tare
Place the sample receptacle on pan and then press the
TARE key and then will point to and the WEIGHT
display shows 0
2. Clearing the previous tare weight. Remove receptacle
from the pan then press TARE key and the WEIGHT
display returns to zero.
C. Counting Function
1. PIECE COUNT setting(e.g.)
a. Count the desired sample pieces(e.g.:20 pieces)and
To Next Page
Loading...
