80” [2032mm]
A
A - 8” [203mm]
B - 4” [102mm]
Door
Height
(H)
(H)
plus
1-
5
/8”
[41.5mm]
3
/8” [9.5mm] Gap
A A A A A A A A
B B
6
4
2
2
4
2
2
2
1
2
4
4
4
4
6
6
Designer Series
Wrench/Socket Drill Bit Allen Wrench Driver Bit 2’-3’ Level Power Drill Tape Measure
1/2” (13mm)
9/16” (14mm)
11/16” (17mm)
3/32”
7/32”
1/4”
3/8”
7/16”
3mm
4mm
#8 Phillips
12'
NOTE: This kit is best suited for doors up to 1-
3
/8” thick, up to 36” wide, and no more than
150 pounds.
Before installing the Rail, identify secure points to attach the Rail.
For most wall installations, it is necessary that the Lag Screws are secured to wall studs.
For Lag Screws that cannot be secured
to a wall stud, it will be necessary to
use the Wall Anchors to secure the
Lag Screws into the wall.
Home construction varies; holes may
be added to the Rail to allow Lag
Screws to attach to wall studs.
IMPORTANT:
If at least FOUR Lag Screws (TWO
Lag Screws for each Rail) cannot
be secured to wall studs or other
structural points, DO NOT INSTALL
THIS RAIL KIT.
Barn Door Rail Kit
Parts Included
Recommended Tools
Planning
Installation Manual
4310470
W-DS-KIT-1-WH-2PC
White
● READ ALL INSTRUCTIONS AND CHECK PARTS BEFORE STARTING INSTALLATION
● RETAIN ALL PACKING MATERIALS UNTIL INSTALLATION IS COMPLETE
Lag Screw
SS-10.1006
Socket Head Screw (M6)
SS-10.1004
Door Guide
SS-10.1013
Joint Plate
SS-10.1144
Door Stop
SS-10.1065
Anti-Jump Pad
SS-10.1076
Marion
Trolley
SS-10.1058
Nut (M10-1.5)
SS-10.1010
Floor Anchor
SS-10.1011
1-1/4” Screw
SS-10.1012
3/4” Screw
SS-10.1075
Wall Anchor
SS-10.1002
Spacer
SS-10.1143
Bolt (M10-1.5 x 55)
SS-10.1077
Washer
SS-10.1009
Rail
SS-10.1142
To Next Page
Need help?
General
