Formax FD 8732HS - Autooiler Operation; Eco Mode; Safety Precautions; Safety Devices & Other Features

4
AutoOiler
The AutoOiler pumps 40 CCs of oil onto the cutting head every 30 minutes of run time to help keep
the FD 8732HS working at peak performance.
1. Fill oil reservoir with recommended HS shredder oil.
2. Insert hose into the top of the bottle.
3. The oiler is ready for use.
ECO Mode
When the power switch on the right side of the shredder (see below) is inially turned on, the shredder is automacally in ECO Mode. This
energy-saving feature puts the shredder into standby aer 5 minutes of inacvity.
When the shredder is in standby, the ECO Mode LED on the control panel will be lit. Simply press the start
buon to begin shredding.
To turn o ECO Mode: Turn the power switch to the o posion, then while pressing the stop buon turn the shredder back on, hold the
stop buon down unl the shredder beeps once and release. The Eco Mode indicator LED will go out indicang that the shredder is no
longer in Eco Mode. To re-engage Eco Mode simply turn the shredder o and back on again.
Safety Precautions
To avoid personal injury, and damage to the shredder, observe the following safety precau-
ons. Please keep these instrucons for future reference.
NOTE: In case of emergency, ip the “Power Switch” to cut o power and/or pull the plug
out of the wall outlet.
 Keep hands, long hair, clothing, ties, jewelry and loose items away from the feed
openings and shred outlet.
 Do not use the shredder for anything other than its intended purpose. Never use
the paper shredding infeed to shred cloth, plastic, cardboard or any hard material
that will cause damage to the shredder blades. Feed only discs into the optical
media slot.
 Do not allow children to use the machine.
 Do not operate with a damaged power cord or plug, or when the machine is damaged in any manner.
 Unplug the shredder when it is being moved, or if it is not in use for an extended period of time.
 Do not disconnect the power by pulling only the cord. Hold the plug when disconnecting.
 Keep the shredder away from direct sunlight.
 Do not sit on the shredder or place anything on top of it.

Never open the fixed switch or cover.
Safety Devices and Other Features
Automac Reverse Rotaon
When too much paper is inserted, the cuer stops operang and automacally rotates in reverse to discharge the jammed paper.
The shredder will beep. Reduce the amount of paper and restart the operaon.
Door Switch
If the door is open, the shredder will not operate.
Hose & cap assembly
Oil reservoir bottle