Formula Linea - Environmental Notes; Technical Specifications

6
ENVIRONMENTAL NOTES
In order to protect the environment, please follow these simple instructions to cor-
rectly dispose of FORMULA S.a.S products:
1) The packaging does not require special disposal because it is not dangerous in any
way; we suggest recycling paper and plastic.
2) It is also recommended to recycle the metal parts after use.
For both points mentioned above, it is recommended to dispose of the waste fol-
lowing national regulations through the appropriate specialized waste disposal com-
panies.
1 TECHNICAL SPECIFICATIONS
Table 1 Tire Operating Pressure
Size (in)
Max. pres-
sure
(bar)
Max. pres-
sure
(psi)
Size (in)
Max. pressure
(bar)
Max. pressure
(psi)
1,95 4,0 59 2,45 3,3 48
2,00 3,9 58 2,5 3,2 46
2,10 3,8 55 2,55 3,1 45
2,13 3,8 55 2,6 3,1 45
2,20 3,6 52 2,65 3,0 43
2,25 3,6 52 2,7 3,0 43
2,30 3,5 51 2,75 2,9 42
2,35 3,4 49 2,8 2,9 42
2,40 3,3 48
NOTE: The wheel you have purchased has been designed for use with
STANDARD or TUBELESS tires.
WARNING:
If TUBELESS tires are used, verify they are genuine by making sure that are
marked with the TUBELESS logo and from a reputable seller.
Rim size
27.5”(in)
29” (in)
Axle dimensions
Front 100/110 mm – Rear 142/148 /150 mm
Front 100/110 mm – Rear 142/148 /150 mm
Spokes length
Linea2 (28 holes)
Linea3 (28 holes)
Linea4 (32 holes)
LineaG (32 holes)
LineaG (32 holes)
FRONT SX
-
284
278
278
278
FRONT DX
-
286
280
280
280
REAR SX
-
286
280
282
282 (axle 150mm)
REAR DX
-
284
278
280
280 (axle 150mm)
FRONT SX
308
302
-
298
298
FRONT DX
308
304
-
300
300
REAR SX
308
304
-
300
300 (axle 150mm)
REAR DX
308
302
-
298
298
(axle 150mm)
Inflation pressure