Formula Linea - Tires; Mounting Standard Tires

7
2 TIRES
In order to safely use FORMULA LINEA wheels, the tire must be tight on the rim.
FORMULA S.a.S has tested the rims with STANDARD and TUBELESS tires. In any
case, FORMULA S.a.S does not design or produce tires and therefore shall not be
held responsible for performance, quality or malfunctions of the tire.
2.1 Mounting STANDARD tires
-Mount the protective tape (1) on
the rim, placing it with the hole (2)
matching the valve hole in the rim.
-Insert a stop (3) in the valve hole
and finish placing the protective
tape (1) on the rim ensuring the
hole in the tape is aligned with the
valve hole in the rim.
-Get the STANDARD tire that is suitable for your needs.
-Insert the first tire bead (4) in the rim groove.
NOTE: The inner tube should be fitted with a Presta valve (ø 6.5 mm).
4
4
4
1
2
3