Patterns
One Dyad instance contains 32 unique patterns. Pattern switching is
instantaneous, automatable and modulatable. This means that you can use it in
unconventional ways like applying an LFO to the Pattern parameter.
Clicking the Ptn label will open the Copy/Paste/Clear menu which lets you
perform these Pattern operations.
The controls above are what is stored in a Pattern. Trigger & modulation data,
track length and time division are all stored and recalled with the Pattern. This
also means that they are not externally controllable from e.g automation or
modulation.
All the other parameters in Dyad are therefore global, meaning that they are
stored in the device preset and can be automated, modulated etc. This allows for
a very exible structure where you can mix the internal sequencer modulation
with external control such as LFOs etc.
9
To Next Page
Loading...